TRIMOD - BESTA LIQUID LEVEL

Description

Liquid Level.
Specs are:
Type A 01 04:
For Corrosive Environments, As type A 01 04 except that the complete switch housing (excluding the cable gland), is manufactured in stainless steel (CrNiMo) and is therefore highly corrosion resistant
Nominal pressure:
PN 25 max. 25 bar up to 300ºC
Operating temperature:
0 to 300ºC
Ambient temperature:
0 to 70ºC
Density:
min. 0.7 kg/dm3
Operating differential:
fixed 12 mm
Wetside material:
Stainless steel (CrNiMo)
Flange material:
Stainless steel (CrNiMo)
Switch housing material:
Sea water resistant die with Cast Aluminum
Flange dimensions:
Round, approx. 6" in Diameter with Six (6) approx. 1/2" in Diameter mounting holes
Flange Seal part:
Stainless steel (CrNiMo)
Composite flange:
H II, zinc galvanized, passivated
Switch housing material:
Sea water resistant die cast aluminium
Flange:
DN 65, PN 40 to DIN 2501
Flange facing:
Raised face type C, DIN 2526
Switch element:
Microswitch SPDT silver contacts
Switch rating:
250 VAC, 5 A 30 VDC, 5 A
Enclosure:
IP 65
Weight: Approx.
8 lbs. (Approx. 1.8 kg)
Length:
Approx. 15"
Width:
Approx. 6"
NOTE:
These Liquid Levels are similar to the following produced/sold by "Granzow", however our levels have a Heavy Duty, ROUND ANSI Flange with six mounting holes as opposed to the "standard" smaller .flanges found on the attached website:
https://www.granzow.com/liquidlevelcontrols/horizontal/A01/